• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NetPi as Profinet slave with other slaves present
#4
Is there anything special about editing the xml file? Because WorkVisual did not have a problem using the edited file but the actual SPS did not want to load the file. The original example xml file was showing up alright.

Could you possibly provide correct examples of following sizes?
IN/OUT 256/256 Bytes
IN/OUT 128/128 Bytes
  Reply


Messages In This Thread
Answer - by Reimar - July-11th-2018, 06:07 PM
Answer - by Armin@netPI - July-12th-2018, 06:14 AM
Answer - by Armin@netPI - July-12th-2018, 06:22 AM
Answer - by Reimar - July-24th-2018, 11:10 AM
Answer - by Armin@netPI - July-24th-2018, 02:52 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  communication cycle as EtherCAT slave tad 2 2,276 April-20th-2021, 11:14 AM
Last Post: tad
  Profinet to Siemens PLC j.langlois 4 3,775 January-26th-2021, 06:11 PM
Last Post: j.langlois
  Profinet name lost after reboot Dipro 7 5,144 November-16th-2020, 01:07 PM
Last Post: Armin@netPI
  Profinet stopped working (spidev spi0.0: SPI transfer timed out) Schranz 7 5,326 November-2nd-2020, 04:20 PM
Last Post: Armin@netPI
  netPI profinet device name WalterSchaefer 2 2,635 October-7th-2020, 11:10 AM
Last Post: WalterSchaefer
  how to pick up PROFINET data and store them to OPC UA server on Node-RED/netPI. tad 7 5,981 March-16th-2020, 10:21 AM
Last Post: Armin@netPI
  PROFINET IO startup compilation arpan.patel@slscorp.com 3 3,037 February-24th-2020, 12:47 PM
Last Post: Armin@netPI
  Profinet Startup Time Schranz 3 3,642 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  Codesys RTE profinet echteler 2 3,560 September-25th-2019, 09:56 AM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 4,901 August-7th-2019, 10:39 AM
Last Post: hannes

Forum Jump:


Users browsing this thread: 1 Guest(s)