July-14th-2021, 11:25 AM
Dear all,
could you point me any starter guide?
It took me sometime to get NetPi run with one netpi-raspbain container run. But failed on the netpi-nodered. It is about time to clear some doubts.
Q1, Is it normal that netpi is only accessible from the remote PC in the same network? When I first power up, the conosle seems pending at "update UTMP abut system Runlevel Change". I used to thought the console will prompt the username and password, as a usual raspbian.
Q2. Netpi relies on DHCP of the router immediately above it, otherwise, remote access failed.
Q3. When we access docker, Portainer should appear as a running container, but I don't see it. Isn't it?
Q4. Do we have a command line approach to run a container? I have to configure the resources piece by piece from Portainer->Contianers->Add Container.
Thanks,
Yongzhi
could you point me any starter guide?
It took me sometime to get NetPi run with one netpi-raspbain container run. But failed on the netpi-nodered. It is about time to clear some doubts.
Q1, Is it normal that netpi is only accessible from the remote PC in the same network? When I first power up, the conosle seems pending at "update UTMP abut system Runlevel Change". I used to thought the console will prompt the username and password, as a usual raspbian.
Q2. Netpi relies on DHCP of the router immediately above it, otherwise, remote access failed.
Q3. When we access docker, Portainer should appear as a running container, but I don't see it. Isn't it?
Q4. Do we have a command line approach to run a container? I have to configure the resources piece by piece from Portainer->Contianers->Add Container.
Thanks,
Yongzhi