• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Initial Setup of Control Panel with admin + admin thorws error
#1
Hello, 

I just connected the Pi to the network and gave it an ip-address and now I want to setup the rest like it is shown in the Youtube-Video "[color=rgba(0, 0, 0, 0)]netPI - Getting Started with the netPI"[/color]. Unfortunately, it always prints the error "Invalid username or password", when I use the default username and password shown in the video. 
What can I do about it?

Best regards
Michi
  Reply
#2
Hi Michi,
if you say you gave netPI an IP address ... so how did you do that? Just by connecting the device thernet port to network a DHCP server is running or actively by setting a static IP address in the netPI's web UI manually?
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#3
(January-27th-2022, 01:50 PM)Armin@netPI Wrote: Hi Michi,
if you say you gave netPI an IP address ... so how did you do that? Just by connecting the device thernet port to network a DHCP server is running or actively by setting a static IP address in the netPI's web UI manually?
Hi Armin, 

We are using this NetPi in the company network, where devices are connected to a DHCP server and receive an ip-address by the admins. 
By typing https://<ip-address> into the browser we can access the NetPi. 

Best regards
Michi
  Reply
#4
Ok and are you sure nobody else has ever used your netPI and changed the login? So was it a fresh device?

But anyways ... if the user name and password are not known any more then the only chance to return back to normal factory reset state is to use an USB stick and unzip one of the two images included in this file https://www.hilscher.com/fileadmin/big_d..._V1220.zip to the stick. The image depends on the type of netPI you have. A CORE device without industrial Ethernet or an RTE device with.

In the FAQ section here https://www.hilscher.com/applications/pr...ing/netpi/? you will find what else to do with the stick to update/recover software on netPI.

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#5
(January-28th-2022, 06:52 AM)Armin@netPI Wrote: That is, what we opted to do and it works marvelously now. 

Thank you very much
Michi
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  cannot execute file: Exec format error - NETPI tuliosouza 1 1,737 January-13th-2022, 01:17 PM
Last Post: Armin@netPI
  netPI opc ua server pull image error wswitula 3 3,108 August-27th-2021, 10:47 AM
Last Post: wswitula
  netPI setup procedure tad 1 2,054 March-15th-2021, 05:48 AM
Last Post: Armin@netPI
  HilscherAutomation / netPI-bluetooth entrypoint.sh error bbaskii 6 4,177 September-14th-2020, 04:42 PM
Last Post: bbaskii
  Error when using a node 'OpcUaServer' tad 6 5,054 May-12th-2020, 08:35 AM
Last Post: tad
  Automatic setup of NetPI (for production) Martin Serik 3 2,929 December-12th-2019, 03:23 PM
Last Post: Armin@netPI
  netPI Node-Red fieldbus node Error PersEE 5 5,073 October-8th-2019, 03:55 PM
Last Post: Armin@netPI
  error when using GPIO from Python dcatteeu 4 4,416 September-10th-2019, 02:45 PM
Last Post: dcatteeu
  CODESYS - Control for Raspberry Florian 1 3,735 March-18th-2019, 06:16 PM
Last Post: Armin@netPI
  Setup trusted Docker registry on a Raspberry Pi to host netPI containers Armin@netPI 12 12,111 January-31st-2019, 06:47 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)