• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
USB Port Mapping
#6
Well the point is that booting from USB on a Raspberry PI3B - which a netPI device is based on - is not trivial. It is not supported from scatch in the boot ROM and needs to be activated in the security fuses in the Pi3B GPU. See for example https://www.makeuseof.com/tag/make-raspb...-boot-usb/. The desribed method does not work with Hilschers standard netPI OS but with Raspbian OS only.

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
USB Port Mapping - by DSongra - August-24th-2021, 07:22 AM
RE: USB Port Mapping - by Armin@netPI - August-24th-2021, 07:30 AM
RE: USB Port Mapping - by DSongra - August-24th-2021, 08:39 AM
RE: USB Port Mapping - by Armin@netPI - August-24th-2021, 10:57 AM
RE: USB Port Mapping - by patribenq - March-10th-2022, 09:05 AM
RE: USB Port Mapping - by Armin@netPI - March-10th-2022, 09:20 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  443 port issue LucioFiam 5 3,402 November-21st-2022, 05:39 PM
Last Post: LucioFiam
  Docker exposed port don't send data on eth0 COswald 3 4,078 July-15th-2021, 02:10 PM
Last Post: Armin@netPI
  Touchscreen with DVI Port Dipro 1 2,760 March-23rd-2021, 09:46 PM
Last Post: Armin@netPI
  Accessing a modbus device connected to RTE port from Node-RED tad 10 10,030 October-2nd-2020, 07:21 AM
Last Post: Armin@netPI
  Receive at startup additional data through the Fieldbus Port Schranz 1 3,414 September-10th-2020, 10:55 AM
Last Post: Armin@netPI
  Ethercat master mapping SteP 1 2,937 March-2nd-2020, 12:42 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 5,790 August-7th-2019, 10:39 AM
Last Post: hannes
  Static mapping of USB-devices deme 11 12,275 May-15th-2019, 04:02 PM
Last Post: Armin@netPI
  [SOLVED] Using netPI's HDMI port Rahulsagar 2 4,827 December-14th-2018, 02:29 PM
Last Post: Rahulsagar
  [SOLVED] USB Serial device mapping into Container hannes 12 16,709 August-27th-2018, 04:50 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)