• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wi-fi in Access Point mode
Hi Armin, before wasting hours in testing, I don't remember if I can connect via AccessPoint to the Gateway and then I can ping an instrument on the Eth0 network.
Once connected to the access point, I can ping the IP address of Eth0 but not the instrument on the same network as the Eth0 port.
Do I need to enter any rules?
Could this thing be done in both the netPI and an Edge Gateway?

Attached Files Thumbnail(s)

.docx   Test.docx (Size: 21.83 KB / Downloads: 0)
To be honest I am not a networking specialist so I don't know what all is needed in all details.

I remember I had tested such a constellation once and one thing I remember was to enable in the firewall setting to set the eth0 interface to status "trusted". Then with an active access point you should be able to ping devices in the eth0 subnet from a PC for example that is connected to this access point as a client.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

Thanks Armin, yes, the default firewall setting is already set to Trusted.

Hi Armin, I found an old question from a customer, it seems that the IP addresses set in the access point must be completely different from those set in the Eth0 port.
So if the Eth0 port is set as IP: and the SubNet: the Wifi Access Point port "must" be IP: Subnet:
This way it works but I don't know why, my skills stop there, as a client of mine says: I'm a technician up to the curve... :-)
Thanks as always for your availability.
Well, thank you Renato for letting us all know that it works the way I described it.

Two physical interfaces with the very same IP network address room/pool will never work in general. This has nothing to do with netPI and wifi and eth0 doing parallel communications. This is just basic IP networking practice and knowledge in my eyes.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)


Possibly Related Threads…
Thread Author Replies Views Last Post
  NetPI wifi access to WPA2-Enterprise MikeP 4 528 September-3rd-2021, 02:56 PM
Last Post: MikeP
  netPI RTE 3: access from several comm. masters tad 3 644 June-3rd-2021, 12:03 PM
Last Post: Armin@netPI
  Access to RTC from my own container application tad 1 651 March-19th-2021, 02:58 PM
Last Post: Armin@netPI
  Bluetooth Access MGharat 10 3,013 February-25th-2020, 12:58 PM
Last Post: DSongra
Wink How to access Root Directory Rajesh3128 8 1,951 October-16th-2019, 11:19 AM
Last Post: Armin@netPI
  netPI access for remote PLC confign MGharat 3 1,439 October-15th-2019, 09:12 AM
Last Post: Armin@netPI
  How to access netPI? firefly 6 1,895 May-16th-2019, 02:31 AM
Last Post: firefly
  Wi-Fi access problem MGharat 3 1,536 March-12th-2019, 09:27 AM
Last Post: Armin@netPI
  access to netPI MGharat 2 1,132 March-7th-2019, 07:16 AM
Last Post: Armin@netPI
  [SOLVED] Access problems Azzamjj 8 2,332 January-25th-2019, 07:43 AM
Last Post: Armin@netPI

Forum Jump:

Users browsing this thread: 1 Guest(s)