• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Automate Provisioning for netPI, model RTE 3
#1
Is the Control Panel WebUI the only way to provision the Basic Settings (the ones in the Control panel) or is there a possibility to automate the Provisioning (maybe also via an additional package, maybe the Control Panel has some REST interface, ...) ?


Thanks,
Thomas
  Reply
#2
Yes this method of servicing is supported by netPI product. See here https://forum.hilscher.com/thread-369-post-1463.html

A colleague of mine created a Node-RED flow in the refernced post that shows how to use it.

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#3
But when Hilscher is speaking about auto-provisioning then we understand that a device automatically loads containers when it is powered on the first time at end customer side.

This is supported with device "netFIELD Connect" gateway only, not netPI.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#4
Well if I understand the mentioned post correct, you'll need an already configured/provisioned base-system.

My questions is related to the auto-configuring of the basesystem (by script, file upload, ... - that what you do manually in the Control Panel WebUI) ?

e.g.:
- Setting Network config
- Setting Admin credentials
- Starting the Docker Service
- ....

Thanks, Thomas
  Reply
#5
This is also no problem, see here:
https://forum.hilscher.com/thread-216.html
https://forum.hilscher.com/thread-650.html
https://forum.hilscher.com/thread-317.html
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#6
Thanks for the summary - I'll investigate !
Thomas
  Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)