• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EIP Node Red configurator
#1
Hi,

I'm trying to test a Ethernet IP communication with netPI on NodeRED.
I managed to deploy NodeRed on docker (it needed upgrade, so I have firmware version V1.2.0.0). However, when I try to configure the Fieldbus node, I can choose the EIP adapter, but I cannot enter the configurator. Web browser is trying to open new tab (https://DeviceIP:9000/webConfigurator/fieldbus?Config_Filename=Hil~cifX0~Ch_2~CC_5~PC_10.json) and then halts with ERR_CONNECTION_CLOSED (chrome).

Is there something missing in the nodeRED package?NIOT-E-NPI3-51-EN-RE | V1.2.0.0
  Reply
#2
Hello

can't confirm.

See my screen shot under chrome. Just did a quick check a minute ago. Using V1.2.0.0 as well.

   

Are you sure that you entered all the parameters as given in dem container's readme text, especially to set the environment variable FIELD?

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#3
I watched your link you sent ... https://192.168.11.152:9000/webConfigura...PC_10.json

It is https .... whereas our fieldbus container is not requiring https but http.

I am wondering why a https is requested as link by the container. My link is http://10.11.5.13:9000/webConfigurator/e...PC_10.json

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#4
Hi Armin,

Indeed, deleting the "s" helped - now I managed to get some signals from the PLC. As I can see, there are fieldbus slaves implemented - are there any plans for the master/scanner functionality?

Thanks for the help,
Mike
  Reply
#5
Hello Mike,

since netPI includes a netX51 chip that is a slave chip only, netPI RTE 3 can only support slave functionality.

But since CODESYS soft PLC includes PROFINET Master, EtherCAT Master and EtherNet/IP Scanner for 50,-EUR over port eth0 it makes no sense for Hilscher to offer a master too.

You can try CODESYS yourself with another Docker container https://hub.docker.com/r/hilschernetpi/n...sys-basis/. Without a license it runs 2 hours and then stops.

We have youtube video as well: https://www.youtube.com/watch?v=cXIHu3-4-eg

Regards
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Node Red configuration LucioFiam 3 1,653 November-30th-2022, 05:14 PM
Last Post: Armin@netPI
  secure node-red with a username and password Christian_Rau 3 2,848 December-3rd-2021, 11:06 AM
Last Post: Armin@netPI
  cifx0 and Node-Red fabio1975 5 3,109 November-22nd-2021, 01:13 PM
Last Post: Armin@netPI
  Node red web UI issue DSongra 3 3,154 July-22nd-2021, 02:47 PM
Last Post: Armin@netPI
  Node-RED 'projects' possible on netPI? JG_KIT 2 2,305 July-20th-2021, 01:11 PM
Last Post: JG_KIT
  Node-RED: OpcUa Client node tad 4 4,399 June-9th-2021, 08:51 AM
Last Post: tad
  missing the menu items from IO Device Configurator tad 5 3,227 November-20th-2020, 07:41 AM
Last Post: Armin@netPI
  Accessing a modbus device connected to RTE port from Node-RED tad 10 7,908 October-2nd-2020, 07:21 AM
Last Post: Armin@netPI
  5 x NL 50-Mpi and Node Red like colector data? Jotarod 4 3,893 September-14th-2020, 01:59 PM
Last Post: Armin@netPI
  Node-Red "http in"-Node not working DWxPro 8 7,516 June-19th-2020, 01:12 AM
Last Post: DWxPro

Forum Jump:


Users browsing this thread: 4 Guest(s)