June-11th-2019, 01:38 PM
(This post was last modified: July-4th-2019, 07:52 AM by Armin@netPI.)
I am very pleased to announce the availability of the CAN extension module NIOT-E-NPIX-RCAN for netPI RTE 3 and CORE 3 today. Order it through Hilscher directly or our Web Shop (update coming soon). The part numer is #1322.063.
The module USPs are
· CAN 2.0 A/B compatible, ISO 11898-1:2015
· 1MBaud max. transmission rate
· Usage via SocketCAN software interface
· With jumper for CAN bus termination
· Kernel driver capable of accommodating highest bus loads
As usual we have a container ready to use for you at https://hub.docker.com/r/hilschernetpi/n...-npix-rcan. It shows how to turn the native CAN module into a CANopen node using an open source CANopen node stack.
Armin
The module USPs are
· CAN 2.0 A/B compatible, ISO 11898-1:2015
· 1MBaud max. transmission rate
· Usage via SocketCAN software interface
· With jumper for CAN bus termination
· Kernel driver capable of accommodating highest bus loads
As usual we have a container ready to use for you at https://hub.docker.com/r/hilschernetpi/n...-npix-rcan. It shows how to turn the native CAN module into a CANopen node using an open source CANopen node stack.
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
