• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NetHat Labview
#1
Hello,

I am using the netHAT on a Profinet network, that i have a Siemens GU120 VSD and a PLC. I have executed the example from the zip file and it all works fine the raspberry pi is displaying the 32 read 32 write. I now want to analyse this data in labview by connecting my laptop (running Labview Linx) to the raspberry pi.

my question is, is there a way of broadcasting the nethat data to the Ethernet port of the raspberry pi? if so could you provide an example of the code required i have limited knowledge of C++ code, many thanks
  Reply
#2
Hello,

There are several ways to broadcast the netHAT data to the PI's Ethernet port.
Unfortunately, we do not have any example code for your use case since it has to be developed on Raspberry PI side with Linux.

Regards,
Simon
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Using Powerlink firmware with netHAT and config nxd thp9 3 540 August-25th-2020, 01:49 PM
Last Post: Armin@netPI
  NetHAT SPI configuration thp9 1 775 June-10th-2020, 02:05 PM
Last Post: Armin@netPI
  How can i set a EtherCAT node in netHAT 52-RTE? JGLee 6 931 June-9th-2020, 12:38 PM
Last Post: Armin@netPI
  cifX drivers EtherCAT read/write performance with NetHat over STM32 thp9 21 1,379 June-5th-2020, 10:17 AM
Last Post: Armin@netPI
  netHAT as Ethernet/IP Adapter with Codesys lstiegler 11 1,159 May-26th-2020, 06:40 PM
Last Post: Armin@netPI
  netHat configuration via config packets pitau 6 777 May-25th-2020, 02:21 PM
Last Post: Armin@netPI
  NetHAT temperature question thp9 1 719 May-14th-2020, 09:21 PM
Last Post: Armin@netPI
  Using netHAT drivers with custom linux (not Raspbian) FrankS 5 813 September-11th-2019, 06:16 AM
Last Post: Armin@netPI
  Use netPi firmware on netHAT zz_zesys 1 1,040 September-30th-2018, 08:04 PM
Last Post: Armin@netPI
  Problem with NetHAT Configuration adeeljsid 2 696 July-5th-2018, 12:10 PM
Last Post: Simon@netHAT

Forum Jump:


Users browsing this thread: 2 Guest(s)