May-2nd-2019, 12:38 PM
Hello Andi,
I was just checking cifx0 and pinging devices across a valid network successfully.
In order to have a totally independent configuring path I have enabled WLAN on my netPI so that eth0 is physically no longer necessary to exclude side effects. I removed the network cable from it by the way, but it is of course internally setup up well in my "bridged" container.
Our office network is usually a dhcp based one but one could easily configure the same setup manually as a static setup ... and this is excatly what I did right now with my cifx0.
I set up my cifx0 with the same (static) parameter set to fit the office network and calling ping from the container to my PC (part of the network) works ... and also pinging the container from my PC works.
Thx
Armin
I was just checking cifx0 and pinging devices across a valid network successfully.
In order to have a totally independent configuring path I have enabled WLAN on my netPI so that eth0 is physically no longer necessary to exclude side effects. I removed the network cable from it by the way, but it is of course internally setup up well in my "bridged" container.
Our office network is usually a dhcp based one but one could easily configure the same setup manually as a static setup ... and this is excatly what I did right now with my cifx0.
I set up my cifx0 with the same (static) parameter set to fit the office network and calling ping from the container to my PC (part of the network) works ... and also pinging the container from my PC works.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
