May-2nd-2019, 11:35 AM
Well Andi,
you configured the gateway 10.7.1.1 and this is how it is configured now.
So once you call just "ping 10.7.1.20" for example within the container, the ethernet protocol will send an ARP telegram from 10.7.1.115 to the IP address 10.7.1.1 to ask for the MAC address of 10.7.1.1 first of all. And if the 10.7.1.1 device does not exits, then the ping command will not get back any response and hence will fail.
Are you sure you have a gatewas running at 10.7.1.1?
Thx
Armin
you configured the gateway 10.7.1.1 and this is how it is configured now.
So once you call just "ping 10.7.1.20" for example within the container, the ethernet protocol will send an ARP telegram from 10.7.1.115 to the IP address 10.7.1.1 to ask for the MAC address of 10.7.1.1 first of all. And if the 10.7.1.1 device does not exits, then the ping command will not get back any response and hence will fail.
Are you sure you have a gatewas running at 10.7.1.1?
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)