April-10th-2019, 05:16 PM
Wow that effect is totally new to me. I know the settings dialog of "cifx0" for device NIOT-E-TPI... and I am really wondering why it appears there on netPI cause the cifX0 is available on the container only and normally nowhere else. So this is why I am not wondering that the settings dialog you see has no influence on the settings made in the container.
Just let me ask you this. Do you use the network mode "host" when you start your container?
I made tests with the new container and set the ip settings via the environment variables. I set IP_ADDRESS to 192.168.0.1 and SUB_NETMASK to 255.255.255.0 and when I jump into the container with a shell and call "ip addr show" it says 192.168.0.1/24 as it should. I don't see the subnet mask misconfigured.
Just let me ask you this. Do you use the network mode "host" when you start your container?
I made tests with the new container and set the ip settings via the environment variables. I set IP_ADDRESS to 192.168.0.1 and SUB_NETMASK to 255.255.255.0 and when I jump into the container with a shell and call "ip addr show" it says 192.168.0.1/24 as it should. I don't see the subnet mask misconfigured.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)