March-13th-2019, 01:02 PM
Loosing the Industrial Ethernet controller's firmware is indeed very very unusual. Once a firmware has been loaded and saved in the controllers FLASH memory it resists there forever.
Here are the only three scenarios I see as possible:
* tried to load a firmware that does not fit to the type hardware in use. For example tried to load a netHAT firmware into netPI
* interrupting a firmware download procedure that is in progress and hence get incomplete
* use a special command to delete the firmware manually
Here are the only three scenarios I see as possible:
* tried to load a firmware that does not fit to the type hardware in use. For example tried to load a netHAT firmware into netPI
* interrupting a firmware download procedure that is in progress and hence get incomplete
* use a special command to delete the firmware manually
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)