November-9th-2018, 10:01 AM
(This post was last modified: November-9th-2018, 10:01 AM by Armin@netPI.)
(November-9th-2018, 09:42 AM)Justin Wrote: The connections to 40 pin header are the connections i am looking for
Those are described in the schematics indeed.
The 40 pin header is nearly the standard HAT format you know from your standard Raspberry Pi: https://pinout.xyz/#
But some pins are not connected since they are in use. For example the communication between BCM CPU and netX CPU goes across SPI0 interface. So it didn't make sense to offer these pins on the 40 pin HAT header too, since they are occupied.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)