August-24th-2018, 10:31 AM
Hi Armin,
thank you too for the fast reply.
I tried the following:
1.:
-Connected arduino
- Restarted netPI
- Try to map /dev/ttyACM0
=> not working with same error "no such file or directory /dev/ttyACM0
2.
- Connected Zebra scanner
- Restarted netPI
- Try to map /dev/hidraw0
=> also not working with the same error "no such device"
When i used both devices on other linux computers (debian) they appeared both as "ttyACMX". I dont know why it is not working here.
The driver of the scanner is one thing, but i think the arduino should work?!
BR
Hannes
thank you too for the fast reply.
I tried the following:
1.:
-Connected arduino
- Restarted netPI
- Try to map /dev/ttyACM0
=> not working with same error "no such file or directory /dev/ttyACM0
2.
- Connected Zebra scanner
- Restarted netPI
- Try to map /dev/hidraw0
=> also not working with the same error "no such device"
When i used both devices on other linux computers (debian) they appeared both as "ttyACMX". I dont know why it is not working here.
The driver of the scanner is one thing, but i think the arduino should work?!
BR
Hannes