• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] "Image unavailable" “no such image” message during deploy
#3
Well Docker will pull by default from Docker hub across port 5000. Maybe this port isn't allowed to be sent data across in your router.
Do you use a DHCP ip address setting? Or have you configured a static IP address?

Also a question is if you have a Raspberry Pi 3 in the same network where you can call "docker pull hilschernetpi/netpi-raspbian" manually. It will show the same effect, I am pretty sure.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
Answer - by kwapphiell - March-9th-2018, 03:22 PM
Answer - by Armin@netPI - March-9th-2018, 06:03 PM
Answer - by kwapphiell - March-15th-2018, 04:47 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  https certificate issues in new nodered docker image Dipro 1 1,661 May-4th-2022, 05:46 AM
Last Post: Armin@netPI
  netPI opc ua server pull image error wswitula 3 3,109 August-27th-2021, 10:47 AM
Last Post: wswitula
  Docker cannot find image COswald 16 8,891 May-18th-2020, 07:15 AM
Last Post: COswald
  PHP-Apache Image hsammer 3 2,714 March-12th-2020, 05:23 PM
Last Post: hsammer
  [SOLVED] Help with fieldbus node Farani 5 3,873 August-20th-2019, 07:22 AM
Last Post: Armin@netPI
  Ready-to-deploy: full featured Node-RED container Armin@netPI 5 4,878 July-25th-2019, 06:16 AM
Last Post: Armin@netPI
  [SOLVED] How to update firmware philippbruhin.ch 12 9,078 July-16th-2019, 11:20 AM
Last Post: patrick
  [SOLVED] Pull Docker Image a.w.d.m. 8 4,997 July-8th-2019, 11:17 AM
Last Post: Armin@netPI
  [SOLVED] Docker issues AlexRegev 7 5,101 June-26th-2019, 02:14 PM
Last Post: AlexRegev
  [SOLVED] Diagnostic service MGharat 1 1,905 April-2nd-2019, 09:45 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)