August-13th-2018, 08:47 AM
Hi Armin,
Thanks for the reply. We have resolved the Internet connection issue by removing the gateway from LAN and we are able to communicate with MQTT. To answer your questions:
- netPI falls back to DHCP or whatever the initial state is after we put the system in use and then try to change the network settings from the web interface. When we change the same settings on a fresh netPi, then the problem does not occur. Is this how it's supposed to work?
- we are using WiFi in client mode
- we don't have a special container for Modbus TCP. Modbus is set up directly from Node-RED running on the raspbian container. Do we need to change anything here?
Thanks,
Afet
Thanks for the reply. We have resolved the Internet connection issue by removing the gateway from LAN and we are able to communicate with MQTT. To answer your questions:
- netPI falls back to DHCP or whatever the initial state is after we put the system in use and then try to change the network settings from the web interface. When we change the same settings on a fresh netPi, then the problem does not occur. Is this how it's supposed to work?
- we are using WiFi in client mode
- we don't have a special container for Modbus TCP. Modbus is set up directly from Node-RED running on the raspbian container. Do we need to change anything here?
Thanks,
Afet