February-1st-2022, 11:02 AM
I'm currently trying to reset a NetPI (NIOT-E-NPI3-EN) via a USB Stick. When I uploaded a Docker image from a tar-file (size 1GB), the NetPI stopped responding to inputs and the web interface was no longer available. I then attempted to restart it by unplugging it and then plugging it in again, but the ACR light stayed off, only the POW light was on.
I have downloaded the Software image and copied the correct files to a USB 3.0-stick according to the instructions. All files and folders are in the root folder of the stick, the stick has format FAT32 and is named "RECOVERY". Unfortunately, the ACT light stays dark when I put in the stick and repower the NetPI. The stick is newly bought. The connected monitor doesn't receive any signal.
I have downloaded the Software image and copied the correct files to a USB 3.0-stick according to the instructions. All files and folders are in the root folder of the stick, the stick has format FAT32 and is named "RECOVERY". Unfortunately, the ACT light stays dark when I put in the stick and repower the NetPI. The stick is newly bought. The connected monitor doesn't receive any signal.
