November-19th-2021, 02:30 PM
Hello to all.
I state that I am taking the first steps in this environment.
I am trying to configure a NIOT-E-NPI3-51-EN-RE to communicate with an S7 PLC that uses an NL-50 MPI
On the NIOT I installed the NODE-RED docker and I was able to get the information from the S7 PLC if it is in the same network segment as the NIOT management card.
My goal, however, is to have a separate management network from the one where the S7 PLCs are connected, I tried to use the ports indicated as FIELDBUS using the appropriate docker to enable them.
https://hub.docker.com/r/hilschernetpi/n...ernet-lan/
But without success, I cannot recover data from NODE-RED from the cifx0 card.
Is there a guide?
I state that I am taking the first steps in this environment.
I am trying to configure a NIOT-E-NPI3-51-EN-RE to communicate with an S7 PLC that uses an NL-50 MPI
On the NIOT I installed the NODE-RED docker and I was able to get the information from the S7 PLC if it is in the same network segment as the NIOT management card.
My goal, however, is to have a separate management network from the one where the S7 PLCs are connected, I tried to use the ports indicated as FIELDBUS using the appropriate docker to enable them.
https://hub.docker.com/r/hilschernetpi/n...ernet-lan/
But without success, I cannot recover data from NODE-RED from the cifx0 card.
Is there a guide?
