August-31st-2021, 07:42 AM
Dear Armin,
Problem is resolved, now I am able to communicate.
Reason is we have to manually write the "0" in serial port selection option, like (/dev/ttyUSB0) then it start communicating.
Br,
Devendra
Yes, I got it.
Problem is resolved, now I am able to communicate.
Reason is we have to manually write the "0" in serial port selection option, like (/dev/ttyUSB0) then it start communicating.
Br,
Devendra
(August-31st-2021, 07:28 AM)Armin@netPI Wrote: One remark in addition We as Hilscher are not responsible for a 3rd party tool like Node-RED and especially we are not responsible for a proper function of Modbus RTU node in all details.
I see a scanning function in this node using the "magnifier" icon. I dont know if this function is working properly and if it is able to scan all the serial ports available on Linux. In my opinion you have to manually enter the serial port name.
But the fact is that under /dev/ you see the serial port available and this device should be able to be used under any application running on this Linux
Yes, I got it.
