• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EtherNet/IP, 2 kinds of connections
#2
Well Tad, I can give you just the same information as I have given in thread https://forum.hilscher.com/thread-733-post-3187.html yesterday already.

The netX51 industrial ethernet controller itself can support your requirements if configured well and a corresponding Linux application is running on the host. Hilscher is only providing C soure code for the standard use cases of a single implicit connection to a single PLC here https://github.com/HilscherAutomation/ne...g-examples which works on both the netPI RTE 3 and netFIELD Connect since there are both supporting the same netX51. There is no example how to program your requirement.

So you have to take the programming manual from here https://kb.hilscher.com/pages/viewpage.a...d=25863152 in the correct version and start programming your own C coded netX51 host program and then extend it for example by an MQTT client from here https://github.com/eclipse/paho.mqtt.c to publish your acquired netX51 data as topics with the MQTT client function to an MQTT broker container and then you have it immediately in a standard Node-RED container using an MQTT client Node-RED node and subscribe to your topics.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
EtherNet/IP, 2 kinds of connections - by tad - June-4th-2021, 02:57 AM
RE: EtherNet/IP, 2 kinds of connections - by Armin@netPI - June-4th-2021, 05:39 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  netFIELD Compact Gateway Profinet IO/ Ethernet IP communication DSongra 1 3,069 December-20th-2022, 10:34 AM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)