January-25th-2021, 09:37 AM
Dear Armin,
In the following site, I found the description below:
>The CSI camera connector is available on the PCB but not populated on the PCBA.
https://www.netiot.com/netpi/industrial-...erry-pi-3/
I mounted (soldered) a CSI camera connector on netPI CORE 3.
I am now ordering a camera to connect it to the connector for a test use.
I will then use a Raspbian OS to test the camera.
I would appreciate it if you have any comments for the above test.
Best regards,
In the following site, I found the description below:
>The CSI camera connector is available on the PCB but not populated on the PCBA.
https://www.netiot.com/netpi/industrial-...erry-pi-3/
I mounted (soldered) a CSI camera connector on netPI CORE 3.
I am now ordering a camera to connect it to the connector for a test use.
I will then use a Raspbian OS to test the camera.
I would appreciate it if you have any comments for the above test.
Best regards,
