December-24th-2020, 01:43 PM
(This post was last modified: December-24th-2020, 02:37 PM by Armin@netPI.)
Hello Madhumati,
this customer setup cannot be supported by netPI. netPI is a Docker only device. This means on one hand you can load multiple container applications in parallel at a time but on the other hand they all run independently from each other. So as with the containers Node-RED and cifX0 Ethernet LAN.
Each of the two containers does not know of the existence of the other and both want to access the netX chip and load it with its respective netX firmware. Node-RED container loads EtherNet/IP but LAN container loads TCP/IP firmware. But there can only one firmware active at a time in netX. So there is a conflict.
The "Connect" gateway (don't mix it with "netFIELD Connect") whereas works different to netPI. It is not a Docker only device. It has additionally Node-RED and also cifX0 driver preloaded natively in the OS. Because of this constellation both Node-RED and cifx0 know from each other because they are not containerized. This mean the "Connect" gateway can be EtherNet/IP device and cifX0 the same time. If you now load the Tosibox container additionally to this device you get exactly what your customer is demanding. Connect gateway can be EtherNet/IP device at the same time to cifX0 and also featuring Tosibox.
Thx
Armin
this customer setup cannot be supported by netPI. netPI is a Docker only device. This means on one hand you can load multiple container applications in parallel at a time but on the other hand they all run independently from each other. So as with the containers Node-RED and cifX0 Ethernet LAN.
Each of the two containers does not know of the existence of the other and both want to access the netX chip and load it with its respective netX firmware. Node-RED container loads EtherNet/IP but LAN container loads TCP/IP firmware. But there can only one firmware active at a time in netX. So there is a conflict.
The "Connect" gateway (don't mix it with "netFIELD Connect") whereas works different to netPI. It is not a Docker only device. It has additionally Node-RED and also cifX0 driver preloaded natively in the OS. Because of this constellation both Node-RED and cifx0 know from each other because they are not containerized. This mean the "Connect" gateway can be EtherNet/IP device and cifX0 the same time. If you now load the Tosibox container additionally to this device you get exactly what your customer is demanding. Connect gateway can be EtherNet/IP device at the same time to cifX0 and also featuring Tosibox.
Thx
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)