Hilscher Community Forum   ›   netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform   ›   Software   ›   missing the menu items from IO Device Configurator

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
missing the menu items from IO Device Configurator
tad
Member
***
Joined: Feb 2020
Posts: 95

Reputation: 0
#1
November-10th-2020, 05:13 AM
Dear Armin,

Today, I pulled a docker image of Node-RED (hilschernetpi/netpi-nodered) to netPI RTE 3.
When I tried to configure PROFINET IO items, I didn't see the menu items such as Project, Download,,,.

If you may find any mistakes, would you please give me advice?

Note:
- I tried the above with both system software 1.2.0.0 and 1.2.1.0.

Thank you very much for your information.
Best regards,


Attached Files Thumbnail(s)
       
  Reply


Messages In This Thread
missing the menu items from IO Device Configurator - by tad - November-10th-2020, 05:13 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  netPI profinet device name WalterSchaefer 2 2,580 October-7th-2020, 11:10 AM
Last Post: WalterSchaefer
  Accessing a modbus device connected to RTE port from Node-RED tad 10 8,207 October-2nd-2020, 07:21 AM
Last Post: Armin@netPI
  EIP Node Red configurator mnieuzyla 4 3,293 September-10th-2019, 06:19 AM
Last Post: Armin@netPI
  [SOLVED] USB Serial device mapping into Container hannes 12 13,870 August-27th-2018, 04:50 PM
Last Post: Armin@netPI
  OPC/UA Client Missing crthomas1234 1 2,246 July-12th-2018, 04:38 PM
Last Post: Armin@netPI
  netPI as USB-Device-Server based on raspbian FrankJacob 26 16,207 July-5th-2018, 10:13 AM
Last Post: Armin@netPI
  [SOLVED] hilschernetpi/netpi-nodered-fieldbus Fieldbus configurator can't be open Andreas 6 5,837 June-11th-2018, 09:12 AM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)