April-11th-2019, 02:05 PM
Hey Patrick,
I have tried to use a user-defined-network using driver "bridge" and the pre-defined "bridge" network, but I get the same result as using network-type "host".
The IP-Adress shown with "ip add show" is "10.7.1.115/8".
Have you tried to use the following configuration and reached the expected behaviour?
Thanks,
Andi
Quote:the network mode "host" is not supported with this feature.
I have tried to use a user-defined-network using driver "bridge" and the pre-defined "bridge" network, but I get the same result as using network-type "host".
The IP-Adress shown with "ip add show" is "10.7.1.115/8".
Have you tried to use the following configuration and reached the expected behaviour?
Code:
address 10.7.1.115
network 255.255.255.0
gateway 10.7.1.1
Thanks,
Andi