April-10th-2019, 03:23 PM
Dear Andi,
based on your last sentence "And the "Network"->"Lan"-Section of the Control Panel shows a subnet-mask of "255.0.0.0" for the "cifx0"-adapter." I see that your are NOT using a Hilscher netPI device as it is maintained in this forum. The device we are discussing here in the forum are of type NIOT-E-NPI3-51-EN-RE and NIOT-E-NPI3-EN.
The device your are using is of type NIOT-E-TPI51-EN-RE. This has a totally different software preloaded as netPI which comes with Docker only. Your device also hosts software like "Node-RED" etc. And this is indeed the problem. On your device the LAN container we are talking about is only working if you disable Node-RED cause Node-RED is using and accessing the same Industrial Network processor as the container and this will NEVER EVER work.
based on your last sentence "And the "Network"->"Lan"-Section of the Control Panel shows a subnet-mask of "255.0.0.0" for the "cifx0"-adapter." I see that your are NOT using a Hilscher netPI device as it is maintained in this forum. The device we are discussing here in the forum are of type NIOT-E-NPI3-51-EN-RE and NIOT-E-NPI3-EN.
The device your are using is of type NIOT-E-TPI51-EN-RE. This has a totally different software preloaded as netPI which comes with Docker only. Your device also hosts software like "Node-RED" etc. And this is indeed the problem. On your device the LAN container we are talking about is only working if you disable Node-RED cause Node-RED is using and accessing the same Industrial Network processor as the container and this will NEVER EVER work.
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)