• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Proxy Settings
#10
From the beginning of netPI development in the year 2016 the security demand of the netPI OS as core software was set to the maximum level. So the decision was not to implement the SSH service into the netPI OS. Also what you must know is even if the device would offer you an SSH service you have no chance to change anything in the OS since there are no commands available such as "apt" or "sudo". It's a proprietary Hilscher OS only.

If you want to have a more open OS, you can easily remove the SD card from the device and insert an SD card loaded with Raspbian OS if you want to use it instead. Then you have an SSH available from the beginning.

The development of the netPI OS is freezed. There are no further developments for this device in planning

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
Proxy Settings - by Motzi - February-7th-2019, 12:05 PM
RE: Proxy Settings - by Armin@netPI - February-7th-2019, 03:24 PM
RE: Proxy Settings - by Motzi - February-7th-2019, 03:32 PM
RE: Proxy Settings - by Armin@netPI - February-7th-2019, 03:37 PM
RE: Proxy Settings - by Motzi - February-7th-2019, 03:48 PM
RE: Proxy Settings - by Armin@netPI - February-7th-2019, 04:23 PM
RE: Proxy Settings - by Hafri - January-29th-2020, 07:56 AM
RE: Proxy Settings - by Armin@netPI - January-29th-2020, 08:45 AM
RE: Proxy Settings - by patribenq - December-5th-2022, 02:35 PM
RE: Proxy Settings - by Armin@netPI - December-5th-2022, 06:21 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Proxy Settings letsysro 4 4,042 May-13th-2018, 07:33 PM
Last Post: Armin@netPI
  Reset netPI to factory settings by software recovery Armin@netPI 0 3,023 January-10th-2018, 09:09 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)