November-15th-2018, 11:28 AM
(This post was last modified: November-15th-2018, 11:29 AM by Armin@netPI.)
Dear Dennis,
even if the device "NIOT-E-TPI51-EN-RE" is not supported through this forum since it is not a netPI unit and supported by hotline@hilscher.com instead, I took a chance to load the HDMI container onto my personal NIOT-E-TPI51-EN-RE. And I am using the same software version as you V1.1.2.0.
But I am sorry to say. On my DELL monitor I am getting the same result as on my NIOT-E-NPI3-EN I used the days before. My monitor tells me still 1920x1080 with 60Hz also with the TPI51 model.
But Dennis, let me ask you this. What type of cable are you using? If you are using a DVI to HDMI adapter in between I am pretty sure it does not work. I am using a HDMI to HDMI V1.4 cable in between device and monitor.
Regards
Armin
even if the device "NIOT-E-TPI51-EN-RE" is not supported through this forum since it is not a netPI unit and supported by hotline@hilscher.com instead, I took a chance to load the HDMI container onto my personal NIOT-E-TPI51-EN-RE. And I am using the same software version as you V1.1.2.0.
But I am sorry to say. On my DELL monitor I am getting the same result as on my NIOT-E-NPI3-EN I used the days before. My monitor tells me still 1920x1080 with 60Hz also with the TPI51 model.
But Dennis, let me ask you this. What type of cable are you using? If you are using a DVI to HDMI adapter in between I am pretty sure it does not work. I am using a HDMI to HDMI V1.4 cable in between device and monitor.
Regards
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)