Remote Access

[Armin@netPI]

Well you said the problem comes up every 2-3 week on any netPI you have installed.

Even if we both think there is no relation between the error and the used disk space any more but still you can check from time to time with the command

df -h

for the used disk space on the system.

It will output you 

Filesystem      Size  Used Avail Use% Mounted on

overlay         6.0G  1.2G  4.6G  21% /
tmpfs            64M     0   64M   0% /dev
tmpfs           461M     0  461M   0% /sys/fs/cgroup
/dev/dm-0       6.0G  1.2G  4.6G  21% /etc/hosts
shm              64M     0   64M   0% /dev/shm
tmpfs           461M     0  461M   0% /sys/firmware


The available disk space under /dev/dm-0 is the most important value.

You have the chance tomorrow to visit the netPI on-site. Please check if it can be recovered by a simple power on reset or if you have to do other things, like reinstalling the image or reloaded any of the containers. Maybe also it would be good to connect a display to the HDMI port during the first start to watch to log output.

But before installing anything use the very nice syslog feature in version 1.1.3.0. netPI saves all the problems found in a log file. So after the restart go to the web console under "system/syslog" and download the file found. You can send it to netpi@hilscher.com if you feel it contain proprietary information, otherwise append it to a post.