November-17th-2017, 01:19 PM
Hello,
I am trying to transfer some data as done in ChannelDemo() found in PNS_simpleConfig.c on the hilschernetpi/netpi-netx-programming-examples and I think I found a discrepancy between the implementation/netX51 firmware and the GSDML file. As I understand the source code, the 10-byte input is echoed to a 4-byte output (from netPi view).
In TIA Portal the GSDML-file gives me a 10-byte input and a 4-byte output (from PLC view).
I think for one view it sould be the other way around. Just try to force all 10 netPi input bytes to a certain value while the PNS_simpleConfig ChannelDemo is running using the GSDML description included in the image.
Is there a netPi profinet firmware and GSDML-file which is capable of transferring more than 4-bytes?
Best regards
Thomas
I am trying to transfer some data as done in ChannelDemo() found in PNS_simpleConfig.c on the hilschernetpi/netpi-netx-programming-examples and I think I found a discrepancy between the implementation/netX51 firmware and the GSDML file. As I understand the source code, the 10-byte input is echoed to a 4-byte output (from netPi view).
In TIA Portal the GSDML-file gives me a 10-byte input and a 4-byte output (from PLC view).
I think for one view it sould be the other way around. Just try to force all 10 netPi input bytes to a certain value while the PNS_simpleConfig ChannelDemo is running using the GSDML description included in the image.
Is there a netPi profinet firmware and GSDML-file which is capable of transferring more than 4-bytes?
Best regards
Thomas
