• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NTP setup (Network time protocol)
#2
Well the condition is NOT to set up an NTP server in any case. The condition is that you have to set the system time at least one time. How depends on you. So setting the time manually gives you the same effect.

Correct is that the video shows you to set up an NTP server. It could show a manual setup instead as well. There was either both ways possible ... I decided to do it via NTP in the video.

It has been recognized in our internal ticket system already that we need to improve the time setup. Today I can't tell you the exact timing when we will implement it. But it will

Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
Answer - by zulliger@software-natives.ch - February-7th-2018, 07:09 PM
Answer - by Armin@netPI - February-7th-2018, 09:05 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Initial Setup of Control Panel with admin + admin thorws error Michi 4 2,830 January-28th-2022, 09:28 AM
Last Post: Michi
  Remot VPN connection from netPI to company network JG_KIT 6 3,053 July-8th-2021, 02:55 PM
Last Post: JG_KIT
  netPI setup procedure tad 1 2,129 March-15th-2021, 05:48 AM
Last Post: Armin@netPI
  Network issues after upgrading to Stretch + kernel to 5.4 carmel85 2 3,104 July-28th-2020, 03:04 PM
Last Post: Armin@netPI
  netpi-desktop-hdmi with setting network=bridge tad 13 8,346 June-19th-2020, 12:50 PM
Last Post: tad
  VPN tunnel to netPI and local network in 10 minutes Armin@netPI 0 2,255 June-5th-2020, 05:40 PM
Last Post: Armin@netPI
  Web browser reports "insecure connection" when accessing netPI for the first time Armin@netPI 2 2,842 January-31st-2020, 07:07 AM
Last Post: Armin@netPI
  Automatic setup of NetPI (for production) Martin Serik 3 3,054 December-12th-2019, 03:23 PM
Last Post: Armin@netPI
  Profinet Startup Time Schranz 3 3,518 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 1,908 June-4th-2019, 04:11 PM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)