March-31st-2018, 06:07 PM
This is easy.
You can drive 2xRJ45 ports of netX as standard Ethernet ports. You have to modify your CODESYS container. After modification you can continue to drive CODESYS across "eth0" port as you do it today or alternatively across "cifX0" port of netX which is the name of netX ports in your container.
I would recommend to drive CODESYS EtherCAT Master across "eth0" and then you program CODESYS runtime across netX ports "cifx0" over your Windows system.
What you need is a combination of our CODESYS example container and this container here:https://hub.docker.com/r/hilschernetpi/netpi-netx-ethernet-lan/ which is creating a standard ethernet port from netX chip. So in any case you have to make your own container.
Armin
You can drive 2xRJ45 ports of netX as standard Ethernet ports. You have to modify your CODESYS container. After modification you can continue to drive CODESYS across "eth0" port as you do it today or alternatively across "cifX0" port of netX which is the name of netX ports in your container.
I would recommend to drive CODESYS EtherCAT Master across "eth0" and then you program CODESYS runtime across netX ports "cifx0" over your Windows system.
What you need is a combination of our CODESYS example container and this container here:https://hub.docker.com/r/hilschernetpi/netpi-netx-ethernet-lan/ which is creating a standard ethernet port from netX chip. So in any case you have to make your own container.
Armin
„You never fail until you stop trying.“, Albert Einstein (1879 - 1955)
