August-23rd-2018, 09:21 AM
(August-23rd-2018, 09:04 AM)Armin@netPI Wrote: Hello Hannes,
just ask me which files you want to change exactly? And what is the purpose of changing the files?
For a short your should do the following:
I pulled the image "hilschernetpi/netpi-raspbian:latest" onto your netPI. Map the port 22 for SSH and enabled priviledge mode also.
Then login with user "pi" and password "raspberry" and as first command type in
Code:echo 1 | sudo tee /sys/class/leds/user0:orange:user/brightness
You will see the LED2 going to state "on".
Regards
Armin
----------------------
Hi Armin,
i mean the change of the file "/sys/class/leds/user0:orange:user/brightness".
But now i got it. The problem was that i dont turned "priviledge mode". Thanks a lot.
BR
Hannes