• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RS232 extension
#1
Hi,

I am trying with RS232 extension module , but the container image is not getting deployed..

How we can know, if the RS232 connector is properly detected during boot by netPI? NO LED glows on extension module...


Attached Files Thumbnail(s)
   
  Reply
#2
Hi,

please check your netPI software version if you use V1.1.5.0 or earlier versions. Please use V1.1.6.0, this version has a prolonged timeout value in case downloading containers from web takes too long sometimes.

Best Regards
Patrick
  Reply
#3
(June-12th-2019, 01:06 PM)Patrick@netPI Wrote: Hi,

please check your netPI software version if you use V1.1.5.0 or earlier versions. Please use V1.1.6.0, this version has a prolonged timeout value in case downloading containers from web takes too long sometimes.

Best Regards
Patrick

Hi Patrick,

I am now using V1.1.6.0. Now I can runRS232 image .
I can get data on node red debug.. Ihave taken Modbus RTU node over tty/S0. please see attaced flow & screenshot..
& I am conncting it to Modsim to read data ...
Why The COM leds on RS232 module do not glow. ?
I am using RS232 cable cross connection 
2-3
3-2
5-5

Hope I am doing correct way

pls guide me to get data
BR
Madhumati

Hi pls find new attachemnts herewith


Attached Files Thumbnail(s)
       

.txt   RS232 Modbus test.txt (Size: 1.25 KB / Downloads: 0)
.txt   RS232 Modbus test.txt (Size: 1.04 KB / Downloads: 0)
  Reply
#4
Hi Madhumati,

the leds on RS232 module are custom NPIX leds. You can switch on/off the NPIX led's with our "npix leds" Node-RED node.
This node is included in the "hilschernetpi/netpi-nodered-npix-leds" image.

Today we will release the "hilschernetpi/netpi-nodered" image. This includes all of our Node-RED nodes like "npix leds" and "serial rs232". The Modbus node will also be included.
I will keep you up to date if we have released this image.


UPDATE (2019-06-13):
The "hilschernetpi/netpi-nodered" image is now released.

Link: "netpi-nodered"
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)