+- Hilscher Community Forum (https://forum.hilscher.com)
+-- Forum: netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform (https://forum.hilscher.com/forum-1.html)
+--- Forum: Software (https://forum.hilscher.com/forum-5.html)
+--- Thread: 443 port issue (/thread-825.html)
443 port issue - LucioFiam - November-19th-2022
Hi,
I need to access to my EdgeGateway from remote site but unfortunately the 443 port is closed, just the 80 is open. So the browser shows a FORBIDDEN messages when I try to connect to the EdgeGateway; also if I try IP:80 because 443 is closed
It's possible to change some web-server configurations of EdgeGateway in order to use other port instead of 443?
RE: 443 port issue - Armin@netPI - November-20th-2022
Well first of all you should tell us which Edge Gateway you are using? We cannot guess the device.
Then please also tell us the software version that is running on your device.
Thank you
Armin
RE: 443 port issue - Armin@netPI - November-20th-2022
And after you told us the correct device name I am able to shift this post to the right position in the forum. Right now it is listed under "netHAT" which is not an Edge Gateway by the way.
RE: 443 port issue - LucioFiam - November-21st-2022
Hi, the device is netIOT Edge Gateway NIOT-E-TPI51-EN-RE (Connect) V1.2.1.0
RE: 443 port issue - Armin@netPI - November-21st-2022
You can use the web server in the device under the menu entry "System > Port Settings" to change the used ports 80 and 443 to any other one you want.
Regards
Armin
RE: 443 port issue - LucioFiam - November-21st-2022
Thanks a lot!