netPI opc ua server pull image error - Printable Version +- Hilscher Community Forum (https://forum.hilscher.com) +-- Forum: netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform (https://forum.hilscher.com/forum-1.html) +--- Forum: Software (https://forum.hilscher.com/forum-5.html) +--- Thread: netPI opc ua server pull image error (/thread-756.html) |
netPI opc ua server pull image error - wswitula - August-26th-2021 Hello Armin, I have a problem with adding opc ua server container. I'm doing everything like on the documentation https://hub.docker.com/r/hilschernetpi/netpi-opcua-server and still when I want to deploy the container, my portainer showing me a problem: No such image:hilschernetpi/netpi-opcua-server:latest. What can I do? Br, wswitula RE: NETpi opc ua server pull impage error - Armin@netPI - August-26th-2021 Only three explanations. * Your netPI has no Internet connection blocked by a firewall * Your system time on your netPI is not synchronized with the real time * You are using Wifi the same time next to Ethernet connection and have a gateway address active in both network setups RE: NETpi opc ua server pull impage error - Armin@netPI - August-26th-2021 If you have wifi also enabled please check not to have two gateway addresses active on interface wlan0 and eth0 the same time else Linux don’t know how to route the internet data correctly. Only one default gateway is allowed at a time in Linux based systems RE: NETpi opc ua server pull image error - wswitula - August-27th-2021 That works! Thank you. Br, wswitula |