CSI camera - Printable Version +- Hilscher Community Forum (https://forum.hilscher.com) +-- Forum: netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform (https://forum.hilscher.com/forum-1.html) +--- Forum: Hardware (https://forum.hilscher.com/forum-4.html) +--- Thread: CSI camera (/thread-690.html) |
CSI camera - tad - January-25th-2021 Dear Armin, In the following site, I found the description below: >The CSI camera connector is available on the PCB but not populated on the PCBA. https://www.netiot.com/netpi/industrial-raspberry-pi-3/faq-netpi/how-compatible-is-netpi-with-a-raspberry-pi-3/ I mounted (soldered) a CSI camera connector on netPI CORE 3. I am now ordering a camera to connect it to the connector for a test use. I will then use a Raspbian OS to test the camera. I would appreciate it if you have any comments for the above test. Best regards, RE: CSI camera - Armin@netPI - January-25th-2021 Well when it came to netPI 5 years ago, we dealt with the manufacturer AVID which of the original components from a standard Raspberry PI 3B we want to have also for netPI. Even it is hard to imagine that a local camera could be connected we decided to reserve space for the camera connector. The connetor has never ever tested by anyone. Also it is not tested during PCBA production. I would just call it "for test purposes" only. Hilscher gives no guarantee that it works and is operating. My personal expectation is that it will work fine. Thx |