[SOLVED] NetPI storage FULL - Printable Version +- Hilscher Community Forum (https://forum.hilscher.com) +-- Forum: netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform (https://forum.hilscher.com/forum-1.html) +--- Forum: Software (https://forum.hilscher.com/forum-5.html) +--- Thread: [SOLVED] NetPI storage FULL (/thread-333.html) |
[SOLVED] NetPI storage FULL - flaminid - October-25th-2018 I have a NetPI unit where the storage space is 100% full and docker do not start. I think the problem was caused by a log file that has grown too much so I need to clean this file. The problem is that Docker button is gray and I cannot connet to portainer and clear the user data. Is there a way to have access to NetIOT file system and clear the file file or the whole user space where it is stored? thank's Davide. RE: NetPI storage FULL - Armin@netPI - October-25th-2018 Hi Davide, the issue is known. Please follow this thread: https://forum.hilscher.com/thread-246.html Docker installation in an old version of netPI firmware saved all console outputs you normally see when you logged in via a terminal program on your sreen in a log file instead ... and this file grows and grows and grows until the SD card of netPI is full. The solution I recommend is to update to the latest netPI software version 1.1.3.0. There is a limit of 1Mbyte set for this log file. I am sorry to say that you will have no chance in your current netPI state to delete this log file otherwise. I hope you have svaed your running containers on a registry server from where you can reload them onto your netPI after the update Thx Armin RE: NetPI storage FULL - flaminid - October-29th-2018 (October-25th-2018, 03:24 PM)Armin@netPI Wrote: Hi Davide, Hi Armin, I updated the firmware to version 1.1.3.0 but I still have no access to docker management. But now the situation is different: Before updating the storage space was 100% full and, looking at the startup log on an HDMI display, I saw a lot of services failing to start (including Docker) Now, after update, the storage is 4% full and everithing is ok during boot but I don't see Docker or Portainer starting like it isn't in the boot script... When I open the web interface the Docker icon is still in gray and I can't open it. Any Idea on what's happening? Thanks, Davide. RE: NetPI storage FULL - Armin@netPI - October-29th-2018 Well. It seems you had a very old firmware before. With this version you need to activate Docker first. Go to Service Menu and activate Docker. The default behaviour was changed t to increase netPI's security |