+- Hilscher Community Forum (https://forum.hilscher.com)
+-- Forum: netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform (https://forum.hilscher.com/forum-1.html)
+--- Forum: Software (https://forum.hilscher.com/forum-5.html)
+--- Thread: Pull image does not work (/thread-189.html)
Answer - Jonas.Sellmann@outlook.de - July-31st-2018
Hello,
we have two netPIs here and I configured both of them with the new recovery software V1.1.3.0 RC3 Hotfix. On the first netPI pulling images and creating container was no problem. The second netPI can't find any images, although I use the same network, which I used for the first netPI.
Any idea?
Thanks in advance,
Jonas
Answer - Armin@netPI - July-31st-2018
Yes I have an idea. To pull any image the netPI's system time must match the current actual time Docker Hub is working at. If not set right after you received a fresh netPI (the capacitor just powers the RTC 7 days only) no images can be found.
Have you set up the system time?
Answer - Jonas.Sellmann@outlook.de - August-1st-2018
Yes, thats it.
Thanks.
Answer - Armin@netPI - August-1st-2018
The message is a little misleading, I know. You cannot conclude from the message popping up the need to set the system time.
There is the plan to lead a user logging in the first time to the clock settings page automatically in order not to forget to set the system time.