+- Hilscher Community Forum (https://forum.hilscher.com)
+-- Forum: netPI 3 - Docker featuring Industrial Raspberry Pi 3 platform (https://forum.hilscher.com/forum-1.html)
+--- Forum: Software (https://forum.hilscher.com/forum-5.html)
+--- Thread: [SOLVED] Broken netPI (/thread-161.html)
[SOLVED] Broken netPI - Laurent - June-29th-2018
I've got two new netPIs.
One is working flawless and the other one does not wan't to work.
When I boot the netPI, he does not send any DHCP discover telegram. (checked on the DHCP server and with Wireshark. the netPI does not send anything)
NS, SYS and POW LEDs are on, rest is constant off. (ACT does not light up some times like on the other netPI)
Even the LEDs of the Ethernet are off, even if the switch indicates a 100Mbit connection.
So I tried to do a FW update with the USB stick. (witch worked with the other netPI)
ACT LED is blinking, the Ethernet LED is on. So the bootloader seems to be alive. But even after 2 hours, the ACT LED is still blinking and the netPI does not work better.
Is there something else that I can try? Or do I really have a broken module?
Thanks for help!
Laurent
Answer - Armin@netPI - July-1st-2018
Is it possible for you to connect a monitor to the HDMI of the netPI that is not working?
netPI is outputting some boot log information about what is happening to it.
If you have a picture, please append the screen shot here.
Also can you post me the http://NTxxxxxxxxxxx number you see on netPIs label please here?
Answer - Laurent - July-2nd-2018
Hi Armin,
Thanks for you inputs. Here you have a screenshot from the output of the module. Seems that the partition table of the flash is broken.
The MAC of the module is B827EB1118A7.
Edit: the attachment of a picture does not work for me.
But what he is telling:
switch to partition #0, OK
mmc0 is current device
** invalid partition 2 **
Wrong Image Format for bootm command
blabla
U-Boot>
Answer - Armin@netPI - July-2nd-2018
Thx for the MAC-ID. I will gonna check in the data base what happened to this device.
Then I will return with further instructions.
Answer - Armin@netPI - July-3rd-2018
The unit has been manufactured 2018-04-19 and was tested as ok.
Did you bought the unit through amazon or through the web shop?
Answer - Laurent - July-3rd-2018
I've received it as a gift during an IOT workshop from Hilscher Switzerland.
Answer - Armin@netPI - July-3rd-2018
Hilscher Switzerland will get in touch with you.
Your netPI was indeed not loaded with an initial software. We need to perform this step in the lab.