July-16th-2019, 10:30 AM
Hi,
you will find a file "HOWTO.text" in your downloaded zip archive ("netPI 2019-07-1 V*.*.*.*.*.*.*.*.zip").
This file contains a more detailed description of the upload procedure.
Excerpt from the howtoo:
"9.) At the end of the procedure the ACT LED stops flashing and goes to state "on" for a second and
then goes to state "off" forever. The recovery is finished."
Please check your USB stick (FAT32 formated, name of usb stick: "RECOVERY" ...).
The contents of the correct image must be unpacked flat on the USB stick.
For netPi Core use: "hilscher-niot-e-npi3-en-V*.*.*.*-recovery.zip"
For netPi RTE use : "hilscher-niot-e-npi3-51-en-re-V*.*.*.*-recovery.zip"
Best Regards
Patrick
you will find a file "HOWTO.text" in your downloaded zip archive ("netPI 2019-07-1 V*.*.*.*.*.*.*.*.zip").
This file contains a more detailed description of the upload procedure.
Excerpt from the howtoo:
"9.) At the end of the procedure the ACT LED stops flashing and goes to state "on" for a second and
then goes to state "off" forever. The recovery is finished."
Please check your USB stick (FAT32 formated, name of usb stick: "RECOVERY" ...).
The contents of the correct image must be unpacked flat on the USB stick.
For netPi Core use: "hilscher-niot-e-npi3-en-V*.*.*.*-recovery.zip"
For netPi RTE use : "hilscher-niot-e-npi3-51-en-re-V*.*.*.*-recovery.zip"
Best Regards
Patrick