November-20th-2018, 06:25 PM
Hello,
I'm working on an Edge Gateway Connect (v. 1.1.2.0) and I installed the Codesys Container (https://hub.docker.com/r/hilschernetpi/n...sys-basis/).
Codesys container has the network interface configured as Host.
I also installed:
My program consists of an EtherNet/IP master that controls two motor.
As a next step, I bought the license for CODESYS Control for Raspberry Pi SL but I have a problem during the license activation.
In detail when I start the license activation, after few second the procedure fails with the error: "No Connection to the device. Please rescan your network"
It seems that the run-time crash. The only way to restore the connection with the gateway is to restart the run time.
Does anybody have this issue?
Thanks in advance.
I'm working on an Edge Gateway Connect (v. 1.1.2.0) and I installed the Codesys Container (https://hub.docker.com/r/hilschernetpi/n...sys-basis/).
Codesys container has the network interface configured as Host.
I also installed:
- CODESYS V3.5 SP13 Patch 2
- CODESYS Control for Raspberry Pi SL. I used the version 3.5.13.0 because, if I use the latest version (v 3.5.13.20), the connection towards the gateway is interrupted after 20 seconds from the connection.
My program consists of an EtherNet/IP master that controls two motor.
As a next step, I bought the license for CODESYS Control for Raspberry Pi SL but I have a problem during the license activation.
In detail when I start the license activation, after few second the procedure fails with the error: "No Connection to the device. Please rescan your network"
It seems that the run-time crash. The only way to restore the connection with the gateway is to restart the run time.
Does anybody have this issue?
Thanks in advance.