• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RTE3 Use real time ethernet as "normal" ethernet interface
#37
Hello Andi,

I see the same effect like you do. I tried to understand the root cause of the error "RTNETLINK answers: Network is down" and I have learned that using an "ip route" command on any interface needs to have it in "up" state before the command can be used. This is not how it is realized today. I never saw this problem cause my interface was "up" always and hence all "ip route" commands worked right away.

Meanwhile I am getting this in my container when I am using your IP setup

Code:
root@b8e92e0e5baf:/# ip route
default via 172.17.0.1 dev eth0
10.7.1.0/24 via 10.7.1.1 dev cifx0
10.7.1.1 dev cifx0 scope link
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2

Is it how it shall look like?
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
RE: RTE3 Use real time ethernet as "normal" ethernet interface - by Armin@netPI - April-30th-2019, 05:49 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Profinet Startup Time Schranz 3 31 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 35 August-7th-2019, 10:39 AM
Last Post: hannes
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 39 June-4th-2019, 04:11 PM
Last Post: Armin@netPI
  niot-e-npi3-51-en (RS485 <-> Industrial Ethernet) merklethomas 6 63 April-26th-2019, 01:38 PM
Last Post: Armin@netPI
  Modbus TCP Connection via RTE Ethernet Ports Flo_Lo 18 492 April-15th-2019, 09:50 PM
Last Post: Armin@netPI
  USB/Ethernet adapter slos 4 52 April-8th-2019, 09:11 AM
Last Post: slos
  [SOLVED] Use netX interface as profinet controller jromero248 2 64 January-10th-2019, 12:30 PM
Last Post: jromero248
  IP Realtime Ethernet michu252 7 324 August-21st-2018, 10:41 AM
Last Post: Armin@netPI
  EtherCAT Slave OP mode (netPI RTE3) mauroriva 1 115 June-20th-2018, 08:38 AM
Last Post: Armin@netPI
  usage of hilschernetpi/netpi-netx-ethernet-lan is working but costs 25% cpu power Michael_d 7 159 March-9th-2018, 10:52 AM
Last Post: Michael_d

Forum Jump:


Users browsing this thread: 1 Guest(s)