• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RTE3 Use real time ethernet as "normal" ethernet interface
#26
Thanks for the update!

When using the following configuration:

Code:
IP_ADDRESS 10.7.1.115
SUBNET_MASK 255.255.255.0
GATEWAY 10.7.1.1

I get these results now:


Quote:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: cifx0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether 00:02:a2:49:bc:f0 brd ff:ff:ff:ff:ff:ff
    inet 10.7.1.115/24 brd 10.7.1.1 scope global cifx0
       valid_lft forever preferred_lft forever
8: eth0@if9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether 02:42:ac:12:00:02 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 172.18.0.2/16 brd 172.18.255.255 scope global eth0
       valid_lft forever preferred_lft forever



For me, it looks like something is still not right, cause the broadcast is "10.7.1.1" instead of "10.7.1.255"?

Also, I cannot find the route of the standard gateway, when checking "ip route show":


Quote:default via 172.18.0.1 dev eth0
10.7.1.0/24 dev cifx0 proto kernel scope link src 10.7.1.115 linkdown
172.18.0.0/16 dev eth0 proto kernel scope link src 172.18.0.2

Is this missing, or do I need to check somewhere else?

Tanks,
Andi
  Reply


Messages In This Thread
RE: RTE3 Use real time ethernet as "normal" ethernet interface - by Andi - April-12th-2019, 02:36 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Profinet Startup Time Schranz 3 31 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 35 August-7th-2019, 10:39 AM
Last Post: hannes
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 39 June-4th-2019, 04:11 PM
Last Post: Armin@netPI
  niot-e-npi3-51-en (RS485 <-> Industrial Ethernet) merklethomas 6 60 April-26th-2019, 01:38 PM
Last Post: Armin@netPI
  Modbus TCP Connection via RTE Ethernet Ports Flo_Lo 18 485 April-15th-2019, 09:50 PM
Last Post: Armin@netPI
  USB/Ethernet adapter slos 4 52 April-8th-2019, 09:11 AM
Last Post: slos
  [SOLVED] Use netX interface as profinet controller jromero248 2 64 January-10th-2019, 12:30 PM
Last Post: jromero248
  IP Realtime Ethernet michu252 7 324 August-21st-2018, 10:41 AM
Last Post: Armin@netPI
  EtherCAT Slave OP mode (netPI RTE3) mauroriva 1 115 June-20th-2018, 08:38 AM
Last Post: Armin@netPI
  usage of hilschernetpi/netpi-netx-ethernet-lan is working but costs 25% cpu power Michael_d 7 158 March-9th-2018, 10:52 AM
Last Post: Michael_d

Forum Jump:


Users browsing this thread: 2 Guest(s)