• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RTE3 Use real time ethernet as "normal" ethernet interface
#22
Hi Andi,

the network mode "host" is not supported with this feature.
Mapping into the host system leads to conflicts between the network manager of the host and that of the container.


Excerpt from the Manual (https://github.com/HilscherAutomation/ne.../README.md):
"Limitation
...
Servicing the cifx0 interface is only possible in the container it was created. It is not available to the Docker host or to any other containers started.
…"

Best regards
Patrick
  Reply


Messages In This Thread
RE: RTE3 Use real time ethernet as "normal" ethernet interface - by patrick - April-11th-2019, 11:13 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Profinet Startup Time Schranz 3 31 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 35 August-7th-2019, 10:39 AM
Last Post: hannes
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 39 June-4th-2019, 04:11 PM
Last Post: Armin@netPI
  niot-e-npi3-51-en (RS485 <-> Industrial Ethernet) merklethomas 6 63 April-26th-2019, 01:38 PM
Last Post: Armin@netPI
  Modbus TCP Connection via RTE Ethernet Ports Flo_Lo 18 492 April-15th-2019, 09:50 PM
Last Post: Armin@netPI
  USB/Ethernet adapter slos 4 52 April-8th-2019, 09:11 AM
Last Post: slos
  [SOLVED] Use netX interface as profinet controller jromero248 2 64 January-10th-2019, 12:30 PM
Last Post: jromero248
  IP Realtime Ethernet michu252 7 324 August-21st-2018, 10:41 AM
Last Post: Armin@netPI
  EtherCAT Slave OP mode (netPI RTE3) mauroriva 1 115 June-20th-2018, 08:38 AM
Last Post: Armin@netPI
  usage of hilschernetpi/netpi-netx-ethernet-lan is working but costs 25% cpu power Michael_d 7 159 March-9th-2018, 10:52 AM
Last Post: Michael_d

Forum Jump:


Users browsing this thread: 1 Guest(s)