• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RTE3 Use real time ethernet as "normal" ethernet interface
#20
Wow that effect is totally new to me. I know the settings dialog of "cifx0" for device NIOT-E-TPI... and I am really wondering why it appears there on netPI cause the cifX0 is available on the container only and normally nowhere else. So this is why I am not wondering that the settings dialog you see has no influence on the settings made in the container.

Just let me ask you this. Do you use the network mode "host" when you start your container?

I made tests with the new container and set the ip settings via the environment variables. I set IP_ADDRESS to 192.168.0.1 and SUB_NETMASK to 255.255.255.0 and when I jump into the container with a shell and call "ip addr show" it says 192.168.0.1/24 as it should. I don't see the subnet mask misconfigured.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
RE: RTE3 Use real time ethernet as "normal" ethernet interface - by Armin@netPI - April-10th-2019, 05:16 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Web browser reports "insecure connection" when accessing netPI for the first time Armin@netPI 2 91 January-31st-2020, 07:07 AM
Last Post: Armin@netPI
  Profinet Startup Time Schranz 3 33 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 36 August-7th-2019, 10:39 AM
Last Post: hannes
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 44 June-4th-2019, 04:11 PM
Last Post: Armin@netPI
  niot-e-npi3-51-en (RS485 <-> Industrial Ethernet) merklethomas 6 64 April-26th-2019, 01:38 PM
Last Post: Armin@netPI
  Modbus TCP Connection via RTE Ethernet Ports Flo_Lo 18 496 April-15th-2019, 09:50 PM
Last Post: Armin@netPI
  USB/Ethernet adapter slos 4 52 April-8th-2019, 09:11 AM
Last Post: slos
  [SOLVED] Use netX interface as profinet controller jromero248 2 66 January-10th-2019, 12:30 PM
Last Post: jromero248
  IP Realtime Ethernet michu252 7 324 August-21st-2018, 10:41 AM
Last Post: Armin@netPI
  EtherCAT Slave OP mode (netPI RTE3) mauroriva 1 116 June-20th-2018, 08:38 AM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)