• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RTE3 Use real time ethernet as "normal" ethernet interface
Hey Armin,

I will try to make it clearer:

Quote:And what do you mean with the standard one? In case you don't specify anything the container falls back to Is it this address you mean as standard one?

With the "standard-configuration" I meant the ip-adress and subnetmask that are used when non are specified by the user.

Quote:Do you mean the new implemented function to set those values across environment variables during container's start now?

I have the same behaviour using the "old"-Image version and setting the network configuration in the file "/etc/network/interfaces.d/cifx0", as if using the "new" Version and declaring the network-parameters using the environment variables.

Quote:The settings of what is configured is stored in the file /etc/network/interfaces.d/cifx0 dynamically during container's start. So in your case to make sure the file has the correct values use the embedded console of portainer.io web GUI to jump into the container and print out what's in the file.

My "/etc/network/interfaces.d/cifx0"-File of the "new"-Image-Version with network-params specified through environment variables looks like this:
auto cifx0
iface cifx0 inet static

But the network configuration is as followed:

5: cifx0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
   link/ether 00:02:a2:49:bc:f0 brd ff:ff:ff:ff:ff:ff
   inet brd scope global cifx0
      valid_lft forever preferred_lft forever

And the "Network"->"Lan"-Section of the Control Panel shows a subnet-mask of "" for the "cifx0"-adapter.



Messages In This Thread
RE: RTE3 Use real time ethernet as "normal" ethernet interface - by Andi - April-10th-2019, 09:35 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Profinet Startup Time Schranz 3 31 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 35 August-7th-2019, 10:39 AM
Last Post: hannes
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 38 June-4th-2019, 04:11 PM
Last Post: Armin@netPI
  niot-e-npi3-51-en (RS485 <-> Industrial Ethernet) merklethomas 6 59 April-26th-2019, 01:38 PM
Last Post: Armin@netPI
  Modbus TCP Connection via RTE Ethernet Ports Flo_Lo 18 484 April-15th-2019, 09:50 PM
Last Post: Armin@netPI
  USB/Ethernet adapter slos 4 52 April-8th-2019, 09:11 AM
Last Post: slos
  [SOLVED] Use netX interface as profinet controller jromero248 2 64 January-10th-2019, 12:30 PM
Last Post: jromero248
  IP Realtime Ethernet michu252 7 324 August-21st-2018, 10:41 AM
Last Post: Armin@netPI
  EtherCAT Slave OP mode (netPI RTE3) mauroriva 1 115 June-20th-2018, 08:38 AM
Last Post: Armin@netPI
  usage of hilschernetpi/netpi-netx-ethernet-lan is working but costs 25% cpu power Michael_d 7 158 March-9th-2018, 10:52 AM
Last Post: Michael_d

Forum Jump:

Users browsing this thread: 1 Guest(s)