• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RTE3 Use real time ethernet as "normal" ethernet interface
#5
Well, I would say using container "bridged" mode is always little tricky cause you have to specifically map all those ports needed by all your applications you have installed in the container ... but you are now also telling that "host" mode doesn't work either which I cannot explain. In "host" mode the container shares in all cases the network stack of the Linux host.
So not reaching the MYSQL-server from "outside" over your remote PC must have other reasons other than the chosen "host" mode. But let me ask you this: your remote PC runs a mysql-client, correct? Which one is it? And by the way which command are u using to install the mysql-server in the container? And also - since I am not so familiar with myqsl things - over which TCP/IP port/protocol is data exchanged over a mysql connection usually?

Thx
Armin
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Messages In This Thread
RE: RTE3 Use real time ethernet as "normal" ethernet interface - by Armin@netPI - March-27th-2019, 07:47 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Profinet Startup Time Schranz 3 31 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  normal ethernet port using for Profinet MGharat 4 35 August-7th-2019, 10:39 AM
Last Post: hannes
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 39 June-4th-2019, 04:11 PM
Last Post: Armin@netPI
  niot-e-npi3-51-en (RS485 <-> Industrial Ethernet) merklethomas 6 60 April-26th-2019, 01:38 PM
Last Post: Armin@netPI
  Modbus TCP Connection via RTE Ethernet Ports Flo_Lo 18 485 April-15th-2019, 09:50 PM
Last Post: Armin@netPI
  USB/Ethernet adapter slos 4 52 April-8th-2019, 09:11 AM
Last Post: slos
  [SOLVED] Use netX interface as profinet controller jromero248 2 64 January-10th-2019, 12:30 PM
Last Post: jromero248
  IP Realtime Ethernet michu252 7 324 August-21st-2018, 10:41 AM
Last Post: Armin@netPI
  EtherCAT Slave OP mode (netPI RTE3) mauroriva 1 115 June-20th-2018, 08:38 AM
Last Post: Armin@netPI
  usage of hilschernetpi/netpi-netx-ethernet-lan is working but costs 25% cpu power Michael_d 7 158 March-9th-2018, 10:52 AM
Last Post: Michael_d

Forum Jump:


Users browsing this thread: 1 Guest(s)