• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NTP setup (Network time protocol)
One of the first things you need to do, once a virgin NetPI3 got unboxed, is to setup NTP, according to the "netPI - Getting Started with the netPI" video. Otherwise, customers run into severe issues, such as not being able to run Docker containers. The reason for the need of NTP is obvious, but I wonder why doesn't the NetPI3 either:
- Setup a generic NTP by default, or
- Offer this setup in a kind of wizard, e.g. right after changing the password?
Is this an oversight? Are there any technical issues I don't grasp? Or is it planned, but you didn't yet had time to implement it?
Well the condition is NOT to set up an NTP server in any case. The condition is that you have to set the system time at least one time. How depends on you. So setting the time manually gives you the same effect.

Correct is that the video shows you to set up an NTP server. It could show a manual setup instead as well. There was either both ways possible ... I decided to do it via NTP in the video.

It has been recognized in our internal ticket system already that we need to improve the time setup. Today I can't tell you the exact timing when we will implement it. But it will

You never fail until you stop trying.“, Albert Einstein (1879 - 1955)


Possibly Related Threads...
Thread Author Replies Views Last Post
  Web browser reports "insecure connection" when accessing netPI for the first time Armin@netPI 2 91 January-31st-2020, 07:07 AM
Last Post: Armin@netPI
  Automatic setup of NetPI (for production) Martin Serik 3 26 December-12th-2019, 03:23 PM
Last Post: Armin@netPI
  Profinet Startup Time Schranz 3 32 November-18th-2019, 03:22 PM
Last Post: Armin@netPI
  Launching multi-containers at a time - Docker stacks Armin@netPI 0 41 June-4th-2019, 04:11 PM
Last Post: Armin@netPI
  [SOLVED] Slow network connection Andi 5 32 May-22nd-2019, 05:16 PM
Last Post: Armin@netPI
  RTE3 Use real time ethernet as "normal" ethernet interface hannes 50 314 May-9th-2019, 04:28 PM
Last Post: Armin@netPI
  Setup trusted Docker registry on a Raspberry Pi to host netPI containers Armin@netPI 12 707 January-31st-2019, 06:47 PM
Last Post: Armin@netPI
  Automatic setup of the Net Pi PBulach 1 75 April-27th-2018, 11:32 AM
Last Post: Armin@netPI
  3 Network Ports possible on NIOT-E-NPI3-51-EN-RE? yulian 7 199 April-3rd-2018, 02:57 PM
Last Post: Armin@netPI
  Problems with NTP setup adeeljsid 4 121 March-17th-2018, 06:42 AM
Last Post: Armin@netPI

Forum Jump:

Users browsing this thread: 1 Guest(s)