• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[INFO] Hard shutdowns
#1
Does netPI is designed for hard shutdowns?
Customer wants to confirm this before performing the uncleaned shutdown test ?

BR

Madhumati
  Reply
#2
netPI runs a standard Linux OS. Whenever you power down netPI while Linux writes a file to the SD card media the same time this will lead to incomplete write accesses and hence to file system errors by very nature of the hardware.

If this netPI is powered again the Linux OS will check for file system error and tries to correct it and moves files detected as inconsistent into the "Lost+Found" folder. It is like your Windows system is doing it after you shutdown your PC unintentionally and it starts to check for file system error and tries to repair them.

But in general netPI does not support a hard shutdown with safe recovery after reboot.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#3
There is one thing in addition. A customer has always the choice to buy a netPI without SD card and software. Then he is able to use his own software and also an OS with a file system that is safe against hard shutdowns and data loss.
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply
#4
In addition I want to highlight an offer from company Reliance in the US.

They offer a transactional fail-safe file system supporting also Linux. So any customer can buy this file system and combine it with his Linux. But there will be no support from Hilscher in doing so and customer has to do the integration 100% by by himself. If he then adds Docker to his Linux then he has basically a netPI equivalent system.

For more information read on here https://www.datalight.com/products/embed...nce-nitro/
You never fail until you stop trying.“, Albert Einstein (1879 - 1955)

  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  {INFO] FCC grant of certification Armin@netPI 0 4 August-2nd-2019, 07:44 AM
Last Post: Armin@netPI
  [INFO] Radio Equipment Directive (RED) certification Armin@netPI 0 5 August-2nd-2019, 07:12 AM
Last Post: Armin@netPI
  [INFO] Mechnical tests Armin@netPI 0 5 May-6th-2019, 04:35 PM
Last Post: Armin@netPI
  [INFO] CAN bus support for netPI lbruder 4 129 February-18th-2019, 10:48 PM
Last Post: Armin@netPI
Information [INFO] 3D CAD model netPI Armin@netPI 0 11 February-1st-2019, 03:18 PM
Last Post: Armin@netPI
Information [INFO] Power connector part number Armin@netPI 0 8 February-1st-2019, 07:00 AM
Last Post: Armin@netPI

Forum Jump:


Users browsing this thread: 1 Guest(s)